MIL-PRF-85036B(AS)
TABLE I. Performance requirements - Continued.
TEST
CHARACTERISTICS
REQUIREMENTS
PARAGRAPH
Blocking resistance
No blocking,
4.6.1
delamination, or
rupture
Contact corrosivity
No corrosion,
4.6.1
etching, or pitting
Puncture resistance
80 lbs min
4.6.1
Resistance to curl
Shall not curl in
4.6.1
excess of 5 percent
or curl back upon
itself
Watervapor transmission rate (WVTR)
4.6.1
1. As received, after room temperature
flexing: (gm/100 sq in/24 hrs)
a. Flexed machine direction
0.02 max
b. Flexed cross-machine direction
0.02 max
2. Aged, after room temperature flexing:
(gm/100 sq in/24 hrs)
a. Flexed machine direction
0.02 max
b. Flexed cross-machine direction
0.02 max
3. After low temperature flexing:
As received (gm/100 sq in/24 hrs)
0.03 max
Breaking strength (grab method)
4.6.1
1. As received:
a. Machine direction (lb)
200 min
b. Cross direction
(lb)
200 min
2. After aging:
a. Machine direction (lb)
200 min
b. Cross direction
(lb)
200 min
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are classified
as follows:
a. First article inspection (see 4.2).
b. Conformance inspection (see 4.3).
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business