INCH-POUND
MIL-PRF-85036B(AS)
26 February 1999
SUPERSEDING
MIL-B-85036A(AS)
29 October 1991
PERFORMANCE SPECIFICATION
BARRIER MATERIALS, HEAVY DUTY, FOR FLEXIBLE ENGINE CONTAINERS
This specification is approved for use by the Naval Air Systems Command, Department of
Navy, and is available for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification establishes the requirements for an opaque, heavy duty barrier
material, having a low water vapor transmission rate, and capable of being heat-sealed on both
surfaces for use in military packaging (see 6.1).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirements documents cited in sections 3 and 4 of this specification, whether or not
they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified,
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be
of use in improving this document should be addressed to: Commander, Naval Air Warfare Center
Aircraft Division, Code 414100B120-3, Highway 547, Lakehurst, NJ 08733-5100, by using the
Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this
document or by letter.
AMSC N/A
FSC 8135
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business