A-A-319A
D. Wrapping paper shall be smoothly and tightly wound on non-returnable cores having an inside diameter of 7.6 cm (3 inches).
E. The wrapping paper shall conform to the requirements as found in Table 1 when tested in accordance with paragraph 4.C.(3).
Table 1
|
Characteristics |
Requirement |
|
|
|
Type I |
Type II |
|
Wax content (60.96 X 91.44 cm- 500) (24 X 36 in- 500) |
4.5 kg, minimum 6.8 kg, maximum (10- 15 lbs)*** |
4.1 kg + 0.45 kg (9 lbs + 1lb) |
|
Basis weight (60.96 X 91.44 cm- 500) (24 X 36 in- 500) |
11.34 kg + 5% |
|
|
Tearing strength, minimum |
17 grams |
|
|
Tensile strength, minimum |
892.9 g/cm (5 lbs/in) |
|
*** Type I paper shall not have less than 1.13 kg (2.5 lbs) of surface wax on each side.
Workmanship. The wet-waxed paper shall be clean, continuously coated with wax, and free from any holes, tears, cuts, creases, chafed spots, scuff marks, blisters, flaking, streaked wax, or objectionable odor. The paper shall be from any other defects which may affect appearance or serviceability.
2. APPLICABLE DOCUMENTS AND DDOCUMENTS SOURCES: The following documents form a part of this commercial item description to the extent specified herein. Unless otherwise indicated, the issue in effect on the date of invitation for bids or request for proposal shall apply:
Fed-Std-No. 123, Marking for Domestic Shipment (Civil Agencies)
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business