NOT MEASUREMENT
SENSITIVE
MIL-PRF-81705E
10 August 2009
SUPERSEDING
MIL-PRF-81705D
w/AMENDMENT 1
14 July 2004
PERFORMANCE SPECIFICATION
BARRIER MATERIALS, FLEXIBLE, ELECTROSTATIC DISCHARGE PROTECTIVE,
HEAT-SEALABLE
This specification is approved for use by all Departments and Agencies of the Department
of Defense.
1. SCOPE
1.1 Scope. This specification establishes the requirements for heat-sealable, electrostatic
discharge protective, flexible barrier materials used for the military packaging of microcircuits,
sensitive semiconductor devices, sensitive resistors, and associated higher assemblies. In
addition, the type I materials provide for watervaporproof protection and attenuation of
electromagnetic interference effects (see 6.1).
1.2 Classification. The barrier materials are furnished in the following types and classes.
Type I - Watervaporproof, electrostatic protective, electrostatic and electromagnetic
shielding.
Class 1 - Suitable for hand operated or automated sealing equipment.
Class 2 - Suitable for automated sealing equipment.
Type III - Transparent, waterproof, electrostatic protective, electrostatic shielding.
Class 1 - Suitable for hand operated or automated sealing equipment.
Class 2 - Suitable for automated sealing equipment.
Comments, suggestions, or questions on this document should be addressed to:
Commander, Naval Air Warfare Center Aircraft Division, Code 4L8000B120-3,
Highway 547, Lakehurst, NJ 08733-5100 or email to Michael.Sikora@navy.mil. Since
contact information can change, you may want to verify the currency of this address
information using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 8135
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business