MIL-DTL-17667E
ASTM-B133
-
Copper Rod, Bar and Shapes. (DoD adopted)
ASTM-B209
-
Aluminum and Aluminum Alloy Sheet and Plate.
(DoD adopted)
(Copies of these documents are available from www.astm.org or from the American Society
for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.)
SOCIETY OF AUTOMOTIVE ENGINEERS (SAE) INTERNATIONAL
SAE-AMS4375
-
Sheet and Plate, Magnesium Alloy 3.0 AL 1.0 ZN
0.20 MN (AZ31B-0) Annealed and
Recrystallized. (DoD adopted)
(Copies of this document are available from www.sae.org or SAE World Headquarters, 400
Commonwealth Drive, Warrendale, PA 15096-0001.)
TECHNICAL ASSOCIATION OF THE PULP AND PAPER INDUSTRY (TAPPI)
TAPPI-T403
-
Paper Bursting Strength.
TAPPI-T410
-
Paper and Paperboard (weight per unit area),
Grammage of.
TAPPI-T414
-
Internal Tearing Resistance of Paper (Elemendorf-
type method).
TAPPI-T494
-
Tensile Breaking Properties of Paper and
Paperboard (using constant Elongation Apparatus).
(Copies of these documents are available from www.tappi.org or the Technical Association
of the Pulp and Paper Industry, Technology Park/Atlanta, P.O. Box 105113, Atlanta, GA
30348.)
2.4 Order of precedence. In the event of a conflict between the text of this document and the
references cited herein, the text of this document takes precedence. Nothing in this document,
however, supersedes applicable laws and regulations unless a specific exemption has been
obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected to first article
inspection in accordance with 4.2.
3.2 Material. Neutral wrapping paper shall be made from sulfate pulp. If reclaimed fiber is
used, then traces of other fibers shall be not greater than 5 percent (see 3.2.1 and 6.5).
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business