INCH-POUND
MIL-DTL-17667E
21 April 2005
SUPERSEDING
MIL-P-17667D
10 September 1980
DETAIL SPECIFICATION
PAPER, WRAPPING, CHEMICALLY NEUTRAL (NON-CORROSIVE)
REACTIVATED AFTER 10 FEBRUARY 2005 AND MAY BE
USED FOR NEW AND EXISTING DESIGN AND ACQUISITIONS.
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 Scope. This specification covers chemically neutral, non-corrosive wrapping paper used
for packaging military supplies and equipment.
1.2 Classification. The types of chemically neutral, non-corrosive wrapping paper are as
follows (see 6.2):
Type I - Flat
Type II - Creped
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort has
been made to ensure the completeness of this list, document users are cautioned that they must
meet all specified requirements of documents cited in sections 3 and 4 of this specification,
whether or not they are listed.
Comments, suggestions, or questions on this document should be addressed to: Commander,
Naval Air Warfare Center Aircraft Division, Code 491000B120-3, Highway 547, Lakehurst, NJ
08733-5100 or emailed to thomas.omara@navy.mil. Since contact information can change, you
may want to verify the currency of this address information using the ASSIST Online database at
https://assist.daps.dla.mil.
AMSC N/A
FSC 8135
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business