A-A-52109
3. QUALITY ASSURANCE
3.1 Certification. The contractor shall certify, and maintain substantiating evidence, that the product offered meets the salient characteristics and requirements of this Commercial Item Description, and that the product conforms to the producer’s own drawings, specification, standards, and quality assurance practices. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
3.2 Tubing examination. Lots of tubing shall be examined in accordance with MIL-STD-105 for the defects listed in table III. The lot size shall be expressed in units of rolls of tubing. The sample unit shall be one roll of tubing. The inspection level shall be S-3 and the acceptable quality level (AQL), expressed in terms of defects per hundred units, shall be 6.5.
TABLE III. Tubing defects
|
Characteristics |
Defects |
|
Construction |
|
|
Stitches |
More than five or less than three per inch. Less than 3/8 inch or more than 5/8 inch from edge of cloth. |
|
Bias |
Less than 400 or more than 500 on the angle. |
|
( ) |
|
|
( ) |
Less than 40 yards long per piece when two or more lengths per roll. Any roll exceeding 200 pounds. |
|
( ) |
Width tolerance greater than ± 1/2 inch. |
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business