A-A-1613A
Table I.
|
Characteristics |
Requirements |
Test Methods |
|
Basis Weight (minimum) |
65 +/- 3.2 g/m2 (40 +/- 2 lbs) based on (24” x 36”-500 sheets) |
TAPPI T 410 |
|
Bursting Strength |
Minimum avg. 20.2 points |
TAPPI T 403 |
|
Tear Resistance |
Minimum 46 grams MD Minimum 54 grams CD |
TAPPI T 414 |
|
Odor |
No Undesirable odor |
TAPPI T 483 |
|
Hydrogen Ion Concentration (Ph) |
Not less than 4.5 and not more than 7.2 |
TAPPI T 435 |
D. Workmanship. The paper shall be free from dirt spots, slits, scuff marks, cuts, wrinkles, holes, and soft spots across the face of the roll. The rolls shall have an even, clean cut edges, and shall be free from lint and dust.
3. QUALITY ASSURANCE.
A. Responsibility for Inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein.
Except as otherwise specified in the contract, the contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the Commercial Item Description, where such inspection are deemed necessary to assure that supplies and cervices conform to prescribed requirements.
B. Sampling. Samples shall be selected for inspection in accordance with MIL-STD-105 using the plans described in Table II. A lot shall consist of a number of sample unite manufactured by the same process form the same components at the same time. Random samples shall be drawn from each lot for the end item inspection. Unless otherwise specified, every lot shall be tested.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business