A-A-1252B
C. Physical Requirements. The pads shall conform to the physical requirements listed in table I below:
TABLE I
|
Characteristics |
Requirement |
Test Method |
|
|
Basis Weight for Type I only, min. |
40.7 g/m2 (25 lbm- 24” x 36”-500 sheets) |
TAPPI T 410 |
|
|
Water Resistance for Type I only |
40 minutes minimum |
TAPPI T 433 |
|
|
Thickness (polyolefin film) |
0.010 mm minimum (0.0004 inch minimum) |
TAPPI T 411 |
|
|
Acidity (pH value) |
5.5 to 9.0 |
TAPPI 509 |
|
|
Odor |
No odor |
TAPPI 483 |
|
|
Absorbency |
Type I |
12 grams minimum |
par. 2.C |
|
|
Type II |
40 grams minimum |
Below |
D. Workmanship. The pad shall not permanently stick to food or tray while preventing leakage of package. The pads shall not fail apart when wet or when removed from the tray, and shall not fall apart when wet or when removed from the tray, and shall not exhibit any dirt, tears or discoloration. The pads shall be free of any dirt, tears, or discoloration. The pads shall be free of any defects adversely affecting its appearance or serviceability.
2. QUALITY ASSURANCE:
A. Responsibility for Inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract, the contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. the Government reserves the right to perform any of the inspection set forth in the Commercial Item Description, where such inspection are deemed necessary to assure that supplies and services conform to prescribed requirements.
B. Sampling. Samples shall be selected for inspection in accordance with MIL-STD-105 using the plans described in table II. A lot shall consist of a number of pads manufactured by the same process from the same components at the same time. Random samples shall be drawn from each lot for the end item inspection. Unless otherwise specified, every lot shall be tested.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business