A-A-52073
The lot size shall be expressed in units of rolls of paper. The sample unit shall be two linear yards full width selected from each of three randomly selected rolls from the lot, and both sides shall be examined. Defects of each type shall be scored only once within each two yard specimen of the sample unit. The inspection level shall be S-3, and the acceptable quality level (AQL), expressed in terms of defects per hundred units, shall be 4.0.
3.4 Regulatory requirements. The offeror/contractor is encouraged to use recovered materials in accordance with Public Law 94-580 to the maximum extent practicable.
4. PACKAGING
4.1 Packaging. Wrapping paper shall be furnished in rolls of the length specified.
4.2 Packing. Each roll shall be wrapped with 40-pound minimum basis weight kraft paper in such a way that the paper shall encircle the roll twice and fold over and protect the ends of the roll. Seams and headers shall be sealed with adhesive or tape.
4.3 Palletization. When specified (see 5.2), rolls packed as specified, shall be palletized on a 4-way entry pallet in accordance with load type XIII of MIL-STD-147. Each prepared load shall be bonded with primary and secondary straps in accordance with bonding means C and D.
4.4 Marking. In addition to any special markings required by the contract or purchase order, rolls and palletized unit loads shall be marked in accordance with MIL-STD-129.
5. NOTES
5.1 Intended use. The paper is intended for use as a protective cover or wrapper, and not as substitute for waterproof barrier material.
5.2 Ordering data. Acquisition documents must specify the following:
a. Title, number, and date of this document.
b. Length of roll required (see 1.1).
c. Type required (see 1.1).
d. When palletization is required (see 4.3).
5.3 Sources of documents.
5.3.1 Sources of nongovernment association documents.
TAPPI T 403- Bursting Strength of Paper
T 404 – Tensile Breaking Strength and Elongation of Paper and Paperboard (Using Pendulum Type Tester)
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business