[METRIC]
A-A-1507A
June 28, 1993
SUPERSEDING
A-A-1507
February 27, 1981
COMMERCIAL ITEM DESCRIPTION
CHIPBOARD
The General Services Administration has authorized the use of this Commercial Item Description in preference to Federal Specification UU-C-282, which is canceled.
SCOPE: This commercial item description covers Chipboard used for general protection and packaging where strength and appearance are not essential.
1. SALIENT CHARACTERISTICS
A. Material. Chipboard shall be prepared by processing materials to insure compliance with the requirements of this description. The chipboard shall be plain and shall not be coated or lined. Two or more plies can be combined.
B. Form and size. Chipboard shall be furnished in sheet form which shall be cut to the size specified. The tolerance for the width and length dimensions shall be minus zero and plus 6.35 mm (1/4 inch). Unless otherwise specified, the size shall be one of the following: 21.59 cm X 27.94 cm (8-1/2” X 11”); 25.4 cm X 28.58 cm (l0; X 11-1/4”); 66.04 cm x“96.52 (26” X 3S”); 121.92 cm X 121.92 cm (48” X 48”).
C. Color. The color shall be natural and may have variations in shade.
D. Thickness. The thickness shall be as specified (see table I) with a tolerance of plus or minus 0.076 mm (0.003”) when tested in accordance with TAPPI T 411.
|
Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data which may improve this document should be sent to the General Services Administration, Engineering Branch, 26 Federal Plaza New York, N.Y. 10278. |
|
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited. |
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business